My Summer Car – DonnerTechRacing Turbocharger for Satsuma
March 16, 2022The DonnerTechRacing Turbocharger mod that adds Turbo to Satsuma by DonnerPlays gives us the ability to add incredible power to Satsuma. In this article, you will find a guide on how to assemble a large Turbo (Racing Turbocharger) and a small GT Turbocharger. The big turbo (Racing) gives us a boost at 2.50, while the small turbo GT adds a boost at the maximum level of 1.40. You can buy all parts for a large turbo from a mechanic (Fleetari), while parts for a small turbo can be found near the shed (between the mechanic and the lake), and you will have to buy the remaining two parts from a mechanic.
Big Turbo (Racing Turbocharger)
Buy the following items:
- Racing Turbocharger Kit
- Racing Turbocharger Straight exhaust (this will allow you to exhaust the exhaust gas directly from the Turbo)
- Turbocharger Exhaust header
- Racing Turbocharger Blowoff Valve
- TwinCarb or Weber Manifold kit (depending on what carburetor you have – this is important)
- Racing Turbocharger Hood
- Intercooler
- Boost gauge
Now assembling the entire turbo kit (Racing Turbocharger)
- Disassemble Header and install Turbocharger Exhaust Header
- Manifold to Carburetor (no screwing required)
- Intercooler (under vehicle registration)
- Racing Turbocharger Intercooler Tube
- Racing Turbocharger Exhaust Outlet Tube
- Racing Turbocharger
- Racing Turbocharger Exhaust intlet Tube
- Intercooler-Manifold Tube
- Racing Turbocharger Blowoff valve
- Boost Gauge (does not require screwing)
- Racing Turbocharger Hood (no screwing required)
Tighten all nuts and bolts (size 8mm, exception – Blowoff valve 5mm)
Exhaust straight can be converted to Exhaust Outlet Tube
If you see ERR on the Boost Gauge – it means Error, you didn’t tighten all screws or you missed some part. There are times when you need to unscrew the two bottom bolts from the exhaust pipe before installing the Exhaust Outlet Tube.
Small Turbo (GT Turbocharger)
Take the items from the GT Turbo near the shed (between the mechanic and the lake) and then buy the following items from the mechanic:
- Turbocharger Exhaust Header
- GT Turbocharger Intercooler Tube
- GT Turbocharger Airfilter
- TwinCarb or Weber Manifold kit (depending on what carburetor you have – this is important)
- Intercooler
- Boost gauge
Now assembling the entire turbo kit (GT Turbocharger)
- Disassemble Header and install Turbocharger Exhaust Header
- Manifold to Carburetor (no screwing required)
- Intercooler (under vehicle registration)
- GT Turbocharger Intercooler Tube
- Intercooler-Manifold Tube
- GT Turbocharger Exhaust Outlet Tube
- GT Turbocharger Exhaust intlet Tube
- GT Turbocharger
- GT Turbocharger Airfilter
- Boost Gauge (does not require screwing)
Tighten all nuts and bolts (size 8mm).
If you see ERR on the Boost Gauge – it means Error, you didn’t tighten all screws or you missed some part. There are times when you need to unscrew the two bottom bolts from the exhaust pipe before installing the Exhaust Outlet Tube.
